Site icon Magzined

The Complete Guide to Buying Oaxial Speaker Cable

Oaxial Speaker Cable

Oaxial Speaker Cable

If you’re looking to upgrade your speaker system, one of the most important investments you can make is in quality Oaxial speaker cable. This guide will provide you with all the information you need to choose the right cable for your needs and get the best sound out of your speakers. Read on to learn more about Oaxial cables and how they can improve your audio experience!

What you need to know

If you’re looking to improve your home theater or audio setup, one of the best ways to do it is by upgrading your speaker cable. In this guide, we’ll go over everything you need to know about Oaxial speaker cable so that you can make an informed decision when purchasing.

First and foremost, Oaxial speaker cable is designed for use with surround sound systems. If you have a 5.1 or 7.1 system, then this is the type of cable you’ll want to use. It’s also important to note that Oaxial cable is not compatible with stereo systems – you’ll need to use a different type of speaker cable for that.

When it comes to choosing the right Oaxial cable for your needs, there are a few things to keep in mind. First, you’ll need to decide on the gauge of the cable. The thicker the gauge, the better the quality of sound will be. However, thicker cables are also more expensive and more difficult to work with.

Another thing to consider is the length of the cable. The longer the cable, the more expensive it will be. However, if you need a long run of cable (say, from your receiver to your back speakers), then it’s worth spending the extra money on a longer length of Oaxial cable.

Finally, you’ll need to decide on the connectors for your Oaxial cable. There are two main types: banana plugs and pin.

What is Cable Gauge?

Cable gauge is a measure of the thickness of the conductor wire in an electrical cable. The thicker the wire, the higher the gauge.

AWG, or American Wire Gauge, is the standard system for measuring the diameter of solid, non-ferrous wires in the United States. The lower the AWG number, the thicker the wire. For example, 12 AWG speaker cable has a thicker conductor than 16 AWG speaker cable.

The most common speaker cables used for home theater applications are 14 AWG and 16 AWG. 18 AWG and 20 AWG cables are also available, but they are not as commonly used because they are more difficult to work with and their performance is not as good as that of thicker cables.

If you are using long runs of speaker cable (more than 50 feet/15 meters), you may want to consider using thicker 12 AWG or 10 AWG cable to minimize signal loss.

Types of Speaker Wire

There are two main types of speaker wire: shielded and unshielded. Shielded speaker wire is typically used in environments where there is a lot of electrical interference, such as in a car. Unshielded speaker wire is typically used in home theater applications.

Shielded speaker wire is typically made of copper or aluminum and is covered with a layer of insulation. The insulation helps to protect the wire from electromagnetic interference (EMI). Shielded speaker wire is more expensive than unshielded speaker wire and is not always necessary.

Unshielded speaker wire is made of copper or aluminum and does not have an extra layer of insulation. Unshielded speaker wire is less expensive than shielded speaker wire but is more susceptible to EMI.

How to Measure Your Speakers

To get the most out of your speakers, it’s important to ensure that they are properly wired. Oaxial speaker cable is the best way to do this, as it provides a clear and concise connection between your speakers and your amplifier. But how do you know what size oaxial speaker cable to buy? Here’s a quick guide on how to measure your speakers so you can make sure you get the right size cable for the job.

First, you’ll need a few tools: a measuring tape, a marker or pencil, and some wire cutters. Once you have those, follow these steps:

1. Measure the distance from your amplifier to your speakers. This will give you an idea of how much cable you’ll need to purchase.

2. Cut two pieces of speaker wire, each about 2 feet longer than the distance you measured in step 1.

3. Strip about ½ inch of insulation off of each end of both wires using the wire cutters. Be careful not to cut into the actual wire inside the insulation.

4. Connect one end of one wire to the positive terminal on your amplifier, and connect the other end of that same wire to the positive terminal on one of your speakers.

5. Connect one end of the other wire to the negative terminal on your amplifier, and connect the other end of that same wire to the negative terminal on your second speaker (or whichever

What is the Difference Between 16AWG and 14AWG?

When it comes to speaker cable, there are two main types: 16AWG and 14AWG. The main difference between the two is the thickness of the wire. 16AWG is typically thinner and thus has less resistance than 14AWG. This means that 16AWG cable is better suited for long runs or runs with high resistance. However, 14AWG can handle more power than 16AWG and is thus better suited for short runs or runs with low resistance.

Gauge Size for Lengths Under 100 Feet

The correct gauge size for Oaxial speaker cable lengths under 100 feet is 16 AWG. If you are using a longer length of speaker cable, or if you are running multiple speakers in parallel, you may need to use a larger gauge size. The American Wire Gauge (AWG) system is used to measure the diameter of the wire, with the larger numbers representing the smaller diameters.

Conclusion

All in all, buying the right Oaxial speaker cable can be an overwhelming task. We hope that this guide has helped you understand what to look for when shopping for one and how to make sure you are getting the best quality product for your money. With a bit of research and information about Oaxial cables, you should now have no problem finding the perfect cable that is perfect for your needs!

Exit mobile version