Although Linksys extenders are unquestionable when it comes to delivering an uninterruptible WiFi speeds, still there comes a time when they kneel down and fail to connect to the 2.4GHz band. Is your Linksys range extender also struggling to establish a connection with 2.4GHz? If it is a yes that we’re sensing, then your prayers have been heard. This post consists of various troubleshooting techniques that will help you fix the issue like it never has shown up. Read on.
Causes: Linksys Extender Won’t Connect to 2.4GHz
- Inaccurate Distance from the Router
The very first reason behind the Linksys connectivity issue with the 2.4GHz might be the inappropriate distance between the extender and the main router. The more inappropriate the distance, the more the difficulties in WiFi signal propagation.
- A Faulty Ethernet Cable
There is a high possibility that you never paid attention to the Ethernet cable connecting your devices after completing the extender setup process. Know that a damaged Ethernet cable breaks the communication between your devices instead of making it stable.
- Outdated Firmware
Apart from the aforementioned reasons, an outdated firmware of the Linksys WiFi range extender can also contribute to creating the issue you’re facing. The reason being it is the governing body for your range extender and you can’t run the extender on an outdated firmware.
- Excessive WiFi Interference
WiFi interference is referred to any object or device that affects the signal propagation of your Linksys extender. Chances are that your extender is sharing location with devices causing WiFi interference. Or you’ve placed it in an area with hotter temperatures.
- Technical Glitches
Technical glitches can cause any issue with a networking device. Since your Linksys WiFi range extender belongs to the world of networking, there are chances that it has also fallen victim to glitches.
So, these were the potential causes of the Linksys extender not detecting 2.4GHz band, it is time that you get through the troubleshooting process so that issue can bid adieu to you.
Fixed: Linksys Extender Won’t Connect to 2.4GHz
Before you try your hands on any of the troubleshooting techniques highlighted in this section, we want you to confirm that you’ve successfully done the Linksys range extender setup. Else, all of your efforts will go wasted.
- Mend the Extender-Router Distance
Start the troubleshooting process by rectifying the mistake done with respect to the distance separating your Linksys wireless range extender from the router. Are your devices too far? If they are, then bring them a little closer so that they can see each other. However, do not bring them so close that their signals get clashed.
- Swap the Ethernet Cable
The damaged Ethernet cable connecting your Linksys extender and router needs to be replaced. A damaged cable is no good to you. Additionally, make sure that you have inserted the Ethernet cable into the Ethernet ports of your devices only.
- Update the Firmware
If the first two troubleshooting techniques have gone in vain and your Linksys extender still can’t connect to 2.4GHz band, then consider checking for the firmware updates for the extender. It can be done by visiting the extender.linksys.com web address. If you find that a new firmware is available for your Linksys device, get it installed as soon as possible.
- Get Rid of WiFi Interference
As mentioned in the section discussing the causes, WiFi interference is equally responsible for dragging you to the Linksys extender can’t connect to 2.4GHz issue, it is time that you do away with it. So, pick your extender up and place it somewhere else. But, wait! Not somewhere else. The new location of the extender needs to be chosen wisely. In other words, your extender must be away from devices emitting EM waves, reflective surfaces, and water-carrying objects. To check whether your extender is sitting properly or not, try to access the http //linksyssmartwifi.com login website. If you’re able to, the placement is done correctly.
- Restart Your Extender
Restarting has been one of the most popular and effective troubleshooting strategies in doing away with maximum Linksys extender-related issues. Therefore, restart your extender by pulling it plug out of the wall outlet and connecting it back. It will also fix technical glitches.
Sum Up
This was all about what to do if your Linksys extender won’t connect to 2.4GHz band. We are expecting that the workarounds mentioned above have helped you in a positive way. On the off chance, you’re still facing connectivity issues, reset your Linksys range extender and set it up again via extender.linksys.com.
